PR9 Cross BlenderWelcome to CeramicEquipment.com! This page is always under development. Please check back often as equipment and photos will be added as soon as they become available. And many items sell quickly.
#0108
PR9 Cross Blender
#0109
Crusher on Base
#0110
Worthington Mixer
#0111
Clearfield Mixer
#0112
Braun Pulverizer
#0113
Kiln Setters
0139 30 Ton RAM™ Studio press, extended stroke, 5 HP Speed Up Drive - SOLD
0140 30 Ton RAM™ Studio press, extended stroke. Asking - SOLD
0141 30 Ton RAM™ Studio press, Standard stroke - SOLD
0142 20 Ton RAM™ Studio Tile press - SOLD
0145 60 Ton RAM™ Studio press, lot of die cases - SOLD
0146 30 Ton RAM™ Studio press, Standard stroke - SOLD
We have customers looking for used equipment, especially Studio presses, if you have idle or underutilized equipment contact us about turning it into usable capital.
Repair is the most widely used term associated with maintenance of industrial equipment. A common definition, to quote Websters New World Dictionary, is to put back in good condition after damage. In the industrial world, repair activity fixes or replaces a failed component; other components are replaced only if they clearly impede the correct functionality of the unit. After a repair the unit is tested to make certain that the repairs have solved the problem description prior to the unit leaving the repair facility. back to top
|
- fixing/replacing only failed components -scope is limited to the supplied complaint -unit is functional based on limited go/no go testing -limited warranty is offered |
Remanufacture of equipment is defined as returning it to a like new or better condition. The unit is disassembled and cleaned prior to installing all applicable updates and enhancements. The unit is inspected for aging components that warrant replacement to assure reliable, like-new condition. back to top
|
- performed by OEM or an authorized representative -all applicable updates and enhancements are installed -unit is cleaned and cosmetically restored -failed and aged components are replaced -testing is performed -unit is returned with a like-new warranty |
Refurbish, sometimes called reconditioning is similar to remanufacturing but is generally performed by third-party firms rather than the OEM (original equipment manufacturer). The firm performing the process may not have access to the technical data to perform the necessary updates and enhancements to the unit. back to top
|
- performed by a third party not authorized by manufacturer of the equipment -unit is cleaned and cosmetically restored -failed and aged components are replaced -limited go/no go testing is performed -limited warranty is offered -may not apply all appropriate updates and enhancements |