1091 Stimmel Road, Columbus, Ohio 43223
USA
Phone 614-443-4634 Fax 614-443-4813
Email: info@ramprocess.com
We have several used items which we would like
to sell. Please contact Rick or John Pelleriti by phone (614-443-4634)
or email (info@ramprocess.com) with your questions. All items
can be viewed at RAM Products (address above).
Two Strip Doors for 12' x 12' opening, scratch resistant
(ribbed both sides), 8" strips, 2" overlap New condition
- never used - still in original boxes. No pictures available.
$230.00 each
ClarkLift C-40B, Serial #C40B-178-782, 4000 lb capacity,
LP gas, 4 cylinder motor, 130" lift height, 2 stage mast,
40" long forks, 123-3/4" overall length w/forks, 38"
overall width, 75-1/2" turning radius, solid rubber tires,
side shift. $5,500.00
ClarkLift C500-80, Serial #685-181-4451, 7500 lb capacity,
6 cylinder motor, LP gas, 154" lift height, 3 stage mast,
43" long forks, 157" overall length w/forks, 50.5"
overall width, 91.7" turning radius, solid rubber tires.
$10,850.00
ClarkLift C500-YS80, Serial #Y685-0387-7413KOF, 6675
lb capacity, 4 cylinder motor, LP gas, 3 stage mast, 43"
long forks, 199" lift height, 158" overall length, 55"
overall width, pneumatic tires. $9500.00
Lincoln Electric IdealArc 250 welder, variable 30-300
amp ac, input is 230/460v, single phase, 60hz. Serial #AC-252020
Code #5825 $500.00
Lincoln Electric Lincwelder AC-225-S Arc Welder, variable
voltage 40-225 amp ac, input is 230v, 60hz, single phase, 50 amp.
Code #8370-102 $150.00
SOLD
Vulcan model #336 Kiln, 230v, 50 amp, 33" wide
x 22-1/2" deep x 26" tall - $500.00
1963 American Tool Works Hole Wizard radial drill -
11" column, 48" column to spindle, 36" base to
spindle, 98" floor to top of column, spindle #4 MT, 12 spindle
speeds 70-2100 RPM, working surface 32" x 54", 7.5hp
motor 220/440v -3 phase, weight is 10,500lb. Equipped with tapping,
manual clamp and power down feed. $14,000.00
SOLD
Kearney & Trecker Model "T" Milling &
Boring Machine, 24" x 54" slotted table, 42" of
table travel, 29" verticle travel, 20" of spindle travel,
needs work, $1500.00
SOLD
Kearney & Trecker Model "T" Milling &
Boring Machine - Table photo
SOLD
Bridgeport milling machine - Model #120159, 9"
x 42" slotted table, 1-1/2" HP variable speed motor
driven milling head. Drive Serial #13678. $3800.00
We also have numerous surplus bridge cranes, 500# to
3 ton capacity.
The
RAM Process - Purge
Unit - Table Top Press
- Studio Press - 1362
Industrial Press - 6987 Industrial
Press
Rollerforming - PressureCasting
- Finishing Machine - Pug
Cutting Equipment - Mixer -
Studio Accessories - Dies -
Mold
Making Supplies - Used
Equipment - RAM Process
History - Art
of Die Making - What's New
- RAM Wear - Home
- Email - Links